Please use this identifier to cite or link to this item: http://www.repositorio.uem.mz/handle258/218
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorMadivate, Carvalho-
dc.contributor.advisorManhique, Arão-
dc.contributor.authorMaleiane, Francisco Manuel Flávio-
dc.date.accessioned2021-08-23T21:17:01Z-
dc.date.issued2016-01-25-
dc.identifier.urihttp://www.repositorio.uem.mz/handle/258/218-
dc.description.abstractA optimização do processo de fusão de vidros técnicos pressupõe um conhecimento das transformações físico-químicas que têm lugar durante a transformação da mistura de matérias-primas num vidro fundido. Devido a falta de dados experimentais fiáveis sobre as transformações que se registam, este processo tem sido descrito por modelos, cujos resultados têm sido questionados pelo facto de estes modelos serem algumas vezes, baseados em pressupostos não realistas, assim como em estudos de sistemas binários e ternários extrapolados para sistemas de composição mais complexa, que não espelham necessariamente o comportamento dos vidros comerciais com uma composição complexa. O problema descrito de dados fiáveis residia no baixo desenvolvimento tecnológico existente na altura em que alguns destes estudos foram realizados. Inspirados nas lacunas que se registam neste domínio, foi conduzido o presente estudo com o objectivo de contribuir para a clarificação do mecanismo de formação de vidros técnicos. No presente estudo usou-se a) o Calorímetro HT 1100 operando para este fim, no modus scanning (Varredura) para a identificação das temperaturas onde ocorrem as transformações, e b) o método da Difracção de Raios X para a identificação das fases presentes em cada estágio. Os resultados dos ensaios de XRD mostram a formação de silicatos binários (CaSiO 3 ) e ternários (Na 2 O.2CaO.3SiO 2 ), assim como reacções de dissociação e transformações polimórficas. A wollastonite (CaSiO 3 ) foi identificada somente nos batches sintéticos, que usam quartzo presente na fase amorfa, enquanto que nos batches preparados a partir da composição e das matérias primas usadas na produção de vidros comerciais não se registou a formação da wollastonite. A tentativa de clarificar o efeito do Fe 2 O 3 e do Al 2 O 3 não trouxe os resultados desejados. Fe 2 O 3 e Al 2 O 3 influenciam algumas propriedades do vidro mas não se obteve evidência de sua participação na formação das fases identificadas neste estudo.en_US
dc.language.isoporen_US
dc.publisherUniversidade Eduardo Mondlaneen_US
dc.subjectVidro técnicoen_US
dc.subjectFusãoen_US
dc.subjectTransformações físico-químicasen_US
dc.subjectTechnical Glassen_US
dc.subjectFusionen_US
dc.subjectPhysico-chemical transformationsen_US
dc.titleTransformações físico-químicas durante a fusão de vidros técnicosen_US
dc.typethesisen_US
dc.description.embargo2021-08-22-
dc.embargo.termsopenAcessen_US
dc.description.resumoThe optimization of the fusing process for technical glass presupposes a knowledge of the physico-chemical transformations that take place during the transformation of the mixture of raw materials in a molten glass. Due to the lack of reliable experimental data on the transformations that have been registered, this process has been described by models, whose results have been questioned by the fact that these models are sometimes, based on unrealistic assumptions, as well as studies of binary systems and extrapolated ternaries for systems of more complex composition, which do not mirror necessarily the behavior of commercial glasses with a composition complex. The problem described for reliable data lay in the low development existing technology at the time when some of these studies were carried out. Inspired in the gaps that are registered in this domain, this study was conducted with the objective of contributing to the clarification of the mechanism for the formation of technical glasses. In the present study we used a) the HT 1100 calorimeter operating for this purpose, in the modus scanning to identify the temperatures where transformations, and b) the X-Ray Diffraction method to identify the phases present at each stage. The results of the XRD tests show the formation of binary silicates (CaSiO 3) and ternary (Na 2 O.2CaO.3SiO 2), as well as dissociation reactions and transformations polymorphic. Wollastonite (CaSiO 3) was identified only in synthetic batches, that use quartz present in the amorphous phase, while in batches prepared from composition and raw materials used in the production of commercial glass are not recorded the formation of wollastonite. The attempt to clarify the effect of Fe 2 O 3 and Al 2 O 3 did not bring the desired results. Fe 2 O 3 and Al 2 O 3 influence some properties of the glass but no evidence was obtained of its participation in the formation of the identified in this study.en_US
Appears in Collections:Dissertações de Mestrado - FC - DQ

Files in This Item:
File Description SizeFormat 
2016 - Maleiane, Francisco Manuel Flávio.pdf1.69 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.